Why Is My Scentsy Air Purifier Light Red? (Quick Fix)

  • Author: Irene Batres
  • Date: October 18, 2022
  • Time to read: 5 min.
Affiliate Disclaimer

As an Amazon Associate, we earn from qualifying purchases.

If you own a Scentsy air purifier, you may have noticed that the light on the front of the unit is red. You may be wondering why this is and what it means.

The red light on your Scentsy air purifier indicates poor indoor air quality. When the air purifier senses poor air quality, it automatically goes into purification mode, and the light turns red.

The red light could also indicate that the filter needs to be replaced. Replacing the filter is a simple process and only takes a few minutes.

Read on as I go deeper and explain why the Scentsy air purifier light turns red and what you can do to improve your indoor air quality.

Why Is My Scentsy Air Purifier Light Red?

How Do You Reset The Filter Light On A Scentsy Air Purifier?

To reset the filter light, press and hold the light button for three seconds. The light will flash and then turn off, indicating that the filter has been reset.

If, however, the red light is due to a clogged-up filter, you will need to replace the filter. The filter lasts 950 hours when the device is used in its highest mode and 1200 hours in the lower mode.

After replacing the filter, you will need to reset the filter light. To do this, press and hold the power button for three seconds. The light will flash and then turn off, indicating that the filter has been reset.

How To Change Your Scentsy Air Purifier Filter

Changing your Scentsy air purifier filter is a simple process. Here’s how to go about it:

Unplug the device: You want to make sure that the device is unplugged before you start changing the filter. Turn the device off and then unplug the cord from the outlet.

Remove the filter cover: The filter compartment is at the bottom of the unit. To remove the filter cover, unscrew the two screws holding it in place. You can then lift off the cover and set it aside.

Pull out the old filter: You must be careful not to touch the activated carbon as it can be messy. Grasp the filter and pull it out of the unit.

Do some cleaning: Using a damp cloth, wipe the inside of the unit. This will remove any dust or debris that has accumulated over time.

Insert the new filter: Take your new filter and insert it into the unit, ensuring it is properly seated.

Replace the cover and screw in place: Once the new filter is in place, you can replace the cover and screw it back.

Plug the device back in: The last step is to plug the device back in and turn it on.

Scentsy Air Purifier FAQ

How Many Square Feet Does The Scentsy Air Purifier Cover?

The Scentsy air purifier covers up to 200 square feet. This makes it ideal for smaller rooms or spaces. You can use it in your bedroom, office, or nursery.

How Long Do Scentsy Air Purifier Filters Last?

When the device is used on the highest setting, the filter will last up to 950 hours. If you use it on the lower setting, the filter can last up to 1200 hours.

However, how long the filter lasts will depend on various other factors, which include the following:

Frequency of use: If you use the device more often, the filter will need to be replaced more frequently.

Indoor air quality: If your indoor air quality is poor, the filter will clog up faster and need to be replaced more frequently.

Room size: The larger the room, the harder the Scentsy air purifier has to work. This means that the filter will need to be replaced more frequently.

Air pollution: If you live in an area with high air pollution, the filter will need to be replaced more frequently.

Where To Find Scentsy Air Purifier Filter Replacement?

You can find replacement filters for the Scentsy air purifier from the company’s official website or authorized retailers. The company recommends that you replace the filter every three to six months, depending on how often you use the device and your indoor air quality.

Amazon is also a great place to find replacement filters for the Scentsy air purifier. Make sure you get the correct size and type of filter for your specific model.

What Type Of Filter Does The Scentsy Air Purifier Use?

The Scentsy air purifier uses a HEPA H13 filter. This type of filter can remove 99.97% of airborne particles that are 0.03 microns or larger. This includes pollen, dust, mold spores, and pet dander.

HEPA H13 air filter is among the highest-quality air filters available on the market. This filter can remove microscopic particles from the air, making it ideal for people with allergies or asthma. HEPA filters are also used in hospital operating rooms and other clean environments.

Is The Scentsy Air Purifier Noisy?

No, the Scentsy air purifier is not noisy. You can even use it while you are sleeping without being disturbed by the sound. On the highest setting, the noise level is 47.9dB, which is way lower than most air purifiers on the market.

Can I Leave the Scentsy Air Purifier On All The Time?

Yes, you can leave the Scentsy air purifier on all the time. However, we recommend using it on the lower setting when you are not home to save energy.

Final Thoughts- Scentsy Air Purifier Red Light

Your Scentsy air purifier has a red light that comes on when the air quality is poor or when it’s time to change the filter. This is an essential part of the maintenance of your device and should not be ignored.

Hopefully, this purifier troubleshooting guide helped you understand why the red light comes on and what you need to do about it.

If you have any further questions, please don’t hesitate to contact us or leave a comment below. We’re always happy to help.

Also If all the troubleshooting steps don’t work then you can always contact Scentsy customer support.

irene mills author of freshairdevices


Irene Batres is eager to help others create an indoor allergen-free home. She has years of experience testing out air purifiers, dehumidifiers, and other products designed to help with indoor air quality. Learn more about me.